Stereo cabinet IR files available. Click here!

Bass Preset available. Click here!

For Atomic Amplifire Presets click here!

presets for lower-output guitars
(single-coils)

80s/chorus presets: "bank 1"

1. x11 chorus
2. x12 clean
3. x13 mild sum
4. x14 drive
5. x15 dirty

Low-Gain presets: "bank 2"

1. x22 chorus
2. x22 clean
3. x23 gritty
4. x24 drive
5. x25 filthy

Mid-gain presets: "bank 3"

1. x31 chorus
2. x32 clean
3. x33 mild sum
4. x34 drive
5. x35 dirty

High-Gain presets: "bank 4"

1. x41 chorus
2. x42 clean
3. x43 gritty
4. x44 drive
5. x45 filthy

General-use presets: "bank 5"

1. x51 chorus
2. x52 clean preset
3. x53 gritty
4. x54 drive
5. x55 filthy

presets for higher-output guitars
(humbuckers/P90s)

80s/chorus presets: "bank 1"

1. s11 chorus
2. s12 clean
3. s13 mild sum
4. s14 drive
5. s15 dirty

Low-Gain presets: "bank 2"

1. s22 chorus
2. s22 clean
3. s23 gritty
4. s24 drive
5. s25 filthy

Mid-gain presets: "bank 3"

1. s31 chorus
2. s32 clean
3. s33 mild sum
4. s34 drive
5. s35 dirty

High-Gain presets: "bank 4"

1. s41 chorus
2. s42 clean
3. s43 gritty
4. s44 drive
5. s45 filthy

General-use presets: "bank 5"

1. s51 chorus
2. s52 clean preset
3. s53 gritty
4. s54 drive
5. s55 filthy

All sounds heard are DI from the AF
(even though some sound like they were recorded "mic'ed up in the room"

Acoustic Pack

acoustic simulation IRs

Ok, let it be clear, I’m under no illusion that you can make an electric guitar sound just like an acoustic guitar. At least i'm not aware of any technology, at the time of writing this, that can achieve this convincingly. However, we said the same thing about digitally modelling valve amps a few years back and look where we are now, so who knows what the future may bring!

The best to be had is by using an acoustic-simulator unit, a few of which are on the market. Other than carrying an acoustic-guitar in your arsenal and all the paraphernalia and effort required to mic it up, an alternative is to employ an Impulse-Response file.

All the sounds featured in the demo use the same preset, which is included in this pack. The amp-section is bypassed and the sound relies on the IR file to deliver the results.

There are ten mono files and ten stereo files.

Included in this pack:

1. Ten mono IR files
2. Ten stereo IR files
3. One acoustic preset

To use these presets:

Load the "acoustic+IR" preset file and import the chosen IR file as the cabinet

Purchase the extended X-pack

This extended pack has 25 presets (listed above)
£5.00

Please allow at least 24 hours for your download as all orders are currently processed manually

PLEASE NOTE: There may be a longer than usual processing time between 13 Nov 2025 - 23 Nov 2025. All received orders should get processed by 23 Nov 2025 at the latest.

Download token usually sent within 24 hours and
likely to be found in your junk-mail folder so keeping checking there!

Purchase the extended S-pack

This extended pack has 25 presets (listed above)
£5.00

Please allow at least 24 hours for your download as all orders are currently processed manually

PLEASE NOTE: There may be a longer than usual processing time between 13 Nov 2025 - 23 Nov 2025. All received orders should get processed by 23 Nov 2025 at the latest.

Download token usually sent within 24 hours and
likely to be found in your junk-mail folder so keeping checking there!

Purchase the Acoustic-pack

£5.00

Please allow at least 24 hours for your download as all orders are currently processed manually

PLEASE NOTE: There may be a longer than usual processing time between 13 Nov 2025 - 23 Nov 2025. All received orders should get processed by 23 Nov 2025 at the latest.

Download token usually sent within 24 hours and
likely to be found in your junk-mail folder so keeping checking there!

You will find the same cabinet IRs in both packs, associated with the preset number

Made with "acoustic" cab IRs